Payment & Shipping Terms:
|Structure:||Automatic Spraying Arm||Max Aggregate:||30mm|
|Advantage:||Four - Wheel Drive||Output:||20m3/h|
|Arm Lenght:||11 M||Weight:||10 Ton|
Automatic wet shotcrete machine
With mechanical arm , automatically spraying system through remote control.
Tunnel application concrete spray system with robotic arm shotcrete machine application
This Mechanical Arm Automatic Guniting Machine are suitable for bigger fracture surface, project which need big output, and tunnel construction which need high efficiency shotcrete.
Mechanical Arm Automatic Guniting Machine, Concrete Spraying System applied in railway tunnel,Road slope protection etc
|1||Complete machine||Transportation clearance(LxWxH)||5750x2170x3100(mm)|
|2||Chassis||Type||all hydraulic wheel type chassis|
|Driving type||four-wheel drive|
|Steer mode||2 wheel steer/4 wheel steer/diagonal|
|Brake mode||parking braking / driving braking|
|Speed (low/high)||5/15 km/h|
|3||Drive system||Engine||4 cylinders water cooling diesel engine 60kw/2200rpm|
|Motor||three phase 380V 45kW/1480rpm (voltage optional)|
|4||Spraying system||Boom mode||Articulated, rotate, Telescopic boom (secondary); Wireless remote controller, proportional adjust, telescopic boom horizontal level linked move|
|Max spraying high||12.5 m|
|Max spraying width||21 m|
|Max spraying distance||10.2 m|
|Telescopic boom rotate||360°|
|Nozzle swing||360° continuous|
|Folding boom tilt||60°/21.5°|
|Telescopic boom tilt||65°/36°|
|Telescopic boom extend and retract||1.4+1.2=2.6m|
|5||Pump system||Pump mode||pump volume adjusted by remote controller|
|Theory pump volume||25 m3/h|
|Max theory outlet pressure||7MPa|
|Max aggregate size||≤16mm|
|Pipe diameter||φ 100mm|
|Concrete cylinder diameter||φ 160mm|
|Concrete cylinder move distance||800mm|
|Hydraulic Cylinder/pole diameter||φ 80/φ 55|
|Hydraulic cylinder move distance||800mm|
|Loading high||< 1200mm|
|6||Additive system||working flow||30~700L/h|
|Additive tank volume||200L|
|7||Cleaning machine||Working flow||14 L/min|
|8||Cable reel||Drive mode||hydraulic motor drive|
|9||Equipment system requirment||Air pressure||>0.5Mpa|
|Air consumption||8 m3/min|
1. Mechanical Arm Automatic Guniting Machine For use in mines, tunnels and outdoor construction.
2. With robot telescope arm, Pumping and Spraying concrete automatically.
3. An automatic system for high precision synchronization between concrete pump and the additive dosing unit
4. All the machine functions are available via the remote control, which facillitates the operator’s work.
5. The six wheel drive increase its perfect manoeuvrability in difficult driving situations.
1. Spraying System of Mechanical Arm Automatic Guniting Machine:
Intelligent spraying control, high accuracy, wide spray area, minimum spray rejection.
2. Working range:
a. long-reach spray boom allows to work at long distance and great height.
b. 3-PRS spray head gives full spherical spray area without blind spot.
c. Full hydraulic intelligent spray boom guarantees no interference when all boom sections working at the same.
a. Rigid chassis, internal combustion – hydrostatic transmission, 4-wheel drive, 4-wheel steering with swiveling driver’s cab.
b.hydraulic supporting leg hold the vehicle steady at all times, absorb forces when material blending, pumping and spraying.
4. Concrete delivery system:
a.Advanced undamped hydraulic system with 1200mm stroke length offers high and steady pumping pressure, also reduce power consuming and parts wearing.
b.Pumping capacity range from 0 to 60 cubic meters. It can be adjusted as per customer requirements to satisfy complicated working conditions. (Recommend capacity range is 4 to 28 cubic meters)
5. Setting Accelerator Adding system:
a. Reliable frequency convert technology complied with PLC and computer control offer a setting control of adding rate depending on concrete out put.
b. Auto-adjusting frequency control offers motor speed change and auto dosing according to concrete delivery amount.
6. Complete machine:
Minimum height and rotation radius, suitable for space limited work sites
1. Full Automatic one set concrete spraying machine for mine, your machine, is it suitable for the project?
Yes, Our concrete spraying system, It is a whole unit of pumping,spraying.
With robot telescope arm, you just control the machine, it will automaticlly working for the project.
2. How much is Mechanical Arm Automatic Guniting Machine price?
It's cheaper than other in the market. The detail price, you can contact me by email,I'll send you according your requirement.
3. I need the machine for tunnel construction spraying concrete, is it suitable for the project?
Of course, our the robot shotcrete machine, is a professional for mines,tunnels,etc.
4. Do you have larger capacity concrete spraying machine?
Yes, we have machine of out put capacity: 5m3/h, 7m3/h, 9m3/h (by manua); 15m3/h, 20m3/h, 25m3/h, 30m3/h, 35m3/h (automatic arm). Please email me about your requirment,i'll offer you as soon as possible.
5. Can you offer the machine operation training?
Yes, we can send technicist to training if you need.
6. The Mechanical Arm Automatic Guniting Machine, can it be transport by container?
Yes, we had ever export machines to international market , the shipping is no problem.
Zhengzhou Sincola Machinery Co.,Ltd is one of the leading professional manufacturers of cement mortar concrete mix pump grouting spraying machineriy, which was established in 2001, located in Huiji District in the northwest suburbs of ZHENGZHOU,focused on the design, R&D, Processing & commission, installation & commission and technical service in area of construction machines for the long-term.
Our main products are Shotcrete Machine (dry mix shotcrete machine SPZ-3,SPZ-5,SPZ-9, wet shotcrete machine), Shotcrete Pump, Concrete Pump, Concrete Mixer Pump, Concrete Mixer, Mortar Mixer, Cement Grouting Mixer, Cement Grouting Pump(Low pressure, high pressure), Mortar Spraying Machine, Mortar Pump,Putty Spraying Machine,Automatic Wall Plastering Render Machine, Industry Peristaltic Pump / Hose Pump etc .