Product Details:
Payment & Shipping Terms:
|
| Output: | 4m3/h | Motor Power: | 4.5kW |
|---|---|---|---|
| Compressor Power: | 2.2kw | Output Pressure: | 3Mpa |
| Delivery Dist.: | 50/30m | Max. Aggregate Size: | 6mm |
| Hopper Volume: | 26L | Hopper Volume:60L Delivery Pipe: | 38mm |
| High Light: | gypsum plastering machine,cement sprayer machine |
||
Introduction:
Plastering Machines SHT38 Hose Pump Plaster Machine is suitable for pumping and spraying the wet ready-mixed mortar.Wth the aid of compressed air in a row, the slurry continuous evenly sprayed on the work; If you need, then through manual leveling, rub.It is grey uniform layer dense, strong bonding, high seepage resistance, save material, reduce the labor intensity, high efficiency, etc.
Features:
1.It's suitable plastering fluid materials, such as thermal insulation material of walls, refractory material, fire-proof material, water-proof material, acoustic material etc.
2. Multi-functional equipment with mixing, pumping, plastering device.
3. The spray speed,capacity, pressure are adjustable.
4.Small size and light weight, flexible movement, convenient operation and maintenance.
5.Low noise, high pressure, high capacity, high efficiency, reliable performance, long service life
Application:
1.Wall Cement Plastering Machine is a new desinged multi-functional plastering equipment.
2.Pumping and spraying ready-mixed mortar material, such as cement mortar, lime plaster, gypsum plaster, masonry mortar.
3.plastering fluid materials, such as thermal insulation material of walls, refractory material, fire-proof material, water-proof material, acoustic material etc.
Parameter:
| Model | SHT38 |
| Output | 4m3/h |
| Air compressor | 0.36m3/h |
| Motor power | 4.5kW |
| Compressor power | 2.2kw |
| Output pressure | 3Mpa |
| Delivery dist. | 50/30m |
| Max. aggregate size | 6mm |
| Hopper volume | 26L |
| Delivery pipe | 38mm |
| Dimension | 1400*600*800mm |
| Weight: | 420kg |
Return on investment analysis;
The traditional manual white wall, plaster and market before white wall machine performance compared
to use putty mortar spraying machine has the following advantages:
1. The little French grey, save water, save material, can reduce more than 20% of the cost.
2, the operation is simple, do not need scaffolding, don't have to mobile devices, need not repair the
grounds, Yin and Yang are free to spray Angle, roof, shortening the time limit for a project, improve the
progress, and cut down the cost of the frame material expenses.
3, quick frozen, high efficiency, low labor intensity, a sprayer can easily spray 150 ㎡, an hour to remove
preparation time, work 8 hours a day calculations, can be sprayed over 1000 ㎡, is equivalent to 20
skilled hard day of work.
4, small investment, large gains, if each device every day spraying 1000 ㎡, according to the market
average of $4 per ㎡, remove the worker's wages of about 500 yuan, profit of 3000 yuan each device can
be a day, get rid of other factors, the annual income of 500000 yuan of above, are also expected.
Pictures:
Two sets wall plastering machine for shipping
