Payment & Shipping Terms:
|He Largest Outlet Pressure:||14/8mpa||Theoretical Maximum Displacement:||25/40m3/h|
|Conveying distance:||Vertical600 M, Level 150 M||Diesel Engine Power:||1.6kw|
|The Hydraulic Oil Tank Volume:||350L||Pumping The Maximum Aggregate Size:||30mm|
1. BSR40-14-61 main characteristic is driven by internal combustion engine work.
2. Hydraulic system adopt three pump, three loop hydraulic system, pumping oil and S valve swing cylinders independent and high reliability. Technology is used to pump hydraulic system to control pilot relief, avoids the reversing impact, make the main pumping hydraulic system more reliable and stable.
3. Pumping hydraulic system with safety overflow protection, at the same time, main pump with the function of pressure cutting off automatically device, give the main pump multistage and reliable protection.
4. Swinging oil oil supply with constant pressure pump, power large, have energy saving function. Taper
sealing or rectangle sealing all line adopts, pipe joint sealing is reliable.
5. The outstanding characteristic of electric control system is advanced technology, simple, high reliability.
More than 90% of electrical components all use Japan mitsubishi company products, ensure the reliability of the components.
6. Lubrication system has a centralized automatic lubrication system, the lubrication pump outlet is equipped with pressure increment and impurities filtration, ensure the lubrication system is more reliable.
7. Cooling system with forced air cooling heat sink device, ensure that the hydraulic system of working oil
temperature control below 60 degrees, so as to guarantee the host hydraulic system is in normal working
8. Glasses plate, cutting ring wearing parts, such as the best pumping condition, the life can reach 20000 Ten thousand square.
9. Hopper, distributing valve system S valve machinery, such as the key mechanical components design, its stress in mechanical engineering mechanics calculating program, the structure system, the stress
concentration status subdivision mesh finite element calculation, design of the hopper, S valve structural
steel is good, good manufacturability.
|2||The largest outlet pressure:14/8mpa|
|3||Theoretical maximum displacement:25/40m3/h|
|4||Distributing valve form:S pipe valve|
|5||Cylinder bore x piston stroke:Φ140×1000mm|
|8||Load material height:1200mm|
|9||Conveying distance:Vertical600 m, level 150 m|
|10||Diesel engine power:1.6kw|
|11||The hydraulic oil type:Antiwear YB-N46/68|
|12||Feeding way:Tank car automatic feeding|
|13||Oil form:Open circuit|
|14||The hydraulic oil tank volume:350L|
|15||Pumping the maximum aggregate size:30mm|
|17||Towing line speed:≤8km/h|
The standard configuration:
Convey steel pipe: 80A×3M×31 80A×2M×1 80A×1M×2
The variable diameter steel pipe:125A-100A×1M×1 100A-80A×1M×2
Bend pipe:125A×900×2 80A×900×6 80A×450×4
High pressure rubber hose:Ø83×6M×3
Pipe joint card: 125A×4 100A×2 80A×50
Joint gasket:125A×10 100A×10 80A×100
The remote controler