Payment & Shipping Terms:
|Degree Of Protection For Motor:||IP55||Guarantee:||One Year|
peristaltic hose pump,
industrial peristaltic pump
Hose squeeze industrial peristalting pump is widely used in Chemical industry, agricultural,mining industry,food industry, papermaking industry,construction industry and so on.
Features:rial Hose Pump
1.No valve operation, no back flow, stable pumping flow, low fault rate.
2.Free exchange of suction inlet and discharge outlet. When the pump is blocked, reversing pump can discharge the obstruction.
3.High vacuum, strong self-suction capacity.
4.Convenient maintenance, less wearable parts (except extruded hose).
Application:ustrial Hose Pump
1. Mining: transmitting filling material during mining, and pulp during the smelting; thick viscosity pulp, water draining of tunnel, absorbent and mortar are applied.
2. Chemical industry: acid, alkali, phosphate slurry, titanium dioxide and such inorganic salt material; crystalline liquid, suspension liquid, emulsion, resin, mud, and all kinds of acid and alkali liquids.
3. Phosphate fertilizer and complex fertilizer: transmission of spray granulation, thick grain pulp, and settled sludge; quantitative transmission of liquid from laboratory.
4. Sewage treatment: transmission of silt slurry, lime slurry; transmission of slurry or crude oil in oil industry or drilling.
5. Ceramic industry: transmission of ceramic pulp, slips, and glaze material.
6. Papermaking industry: transmission of paper pulp, sulphur pulp.
7. Cosmetics: tooth paste, milk, hair conditioner, facial cream, facial oil, etc.
8. Construction: sewage and water of deep pit, cement paste, concrete grout, paint for ceiling, etc.
9. Electroplating and electrolysis: electroplating liquid, electrolyte, anode mud, and precipitate.
10. Food industry: oil material and beverage transmission.
11. Pharmaceuticals industry: all kinds of medicine liquids transmission.
12. old smelting: gold mine pulp, tailings.
13. Other industry: radioactive waste, electrolysis waste, metal waste liquor, paint, textile auxiliaries, adhesive, glue, emulsion, refractory fiber, and other sealing highly required, high viscosity, particle much contained liquids transmission.
|1||Model:SH25C-4 hose pump|
|6||Degree of protection for motor:IP55|
|8||Motor Power(kw):4kW, 380V/240/480 Three phase|
1.Special seal free structure, no leakage, no pollution.
2.Press roller no needs any crease.
3.The liquid contact with tube only, so many kinds of different viscosity, corrosion liquids can be transmitted.
4.Liquids with small solid particle, crystalline, fiber matters or other impurities can be transmitted.
5.No block or break down will happen; strong suction power and self cleaning ability, suck from either end of hose is workable.
6.No need pump priming to start pump. Head of pump and pressure on the hose is high.
7.Easy install, easy operate and low cost repair.
8.Less power is consumed, volume is high efficient utilized, and excellent metering ability it is possessed.